Menu
Article 8F.01

PROFILED DIAMOND CUTTER FOR SIMPLE SHAPE ON REQUEST TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARD- WOOD AND SANDY-WOOD WORKING ON MILLING MACHINES, DOUBLE- END-TENONERS AND SPINDLE MOULDERS

View
Article 8F.02

PROFILED DIAMOND CUTTER FOR COMPLEX SHAPE ON REQUEST TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON MILLING MACHINES, DOUBLE- END-TENONERS AND SPINDLE MOULDERS

View
Article 8F.03

PROFILED DIAMOND CUTTER WITH HYDRO SYSTEM WORKING ON SPINDLE MOULDERS AND DOUBLE-END-TENONERS

View
Article 8F.04

PROFILED DIAMOND CUTTER FOR QUARTER ROUND SHAPE TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON SPINDLE MOULDERS, MILLING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.05

PROFILED DIAMOND CUTTER FOR HALF- ROUND SHAPE WITH CONCAVE RADIUS TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON SPINDLE MOULDERS, MILLING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.06

PROFILED DIAMOND CUTTER FOR HALF- ROUND SHAPE WITH CONVEX RADIUS TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON SPINDLE MOULDERS, MILLING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.07

PROFILED DIAMOND CUTTER FOR RADIUS WORKING ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON SPINDLE MOULDERS, MILLING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.08

DIAMOND CUTTER FOR CHAMFERING 45° TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON SPINDLE MOULDERS, MILLING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.08/S

CHAMFERING DIAMOND CUTTER DEGREES ON REQUEST

View
Article 8F.101

HYDRO CHUCK FOR CNC ROUTER BIT

View
Article 8F.101/A

CHUCK FOR CNC ROUTER BIT

View
Article 8F.11

PROFILED DIAMOND CUTTER SET ON REQUEST FOR PROFILING AND END TRIMMING OF CABINET DOORS TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON SPINDLE MOULDERS AND MILLING MACHINES

View
Article 8F.111

MORTISE CHISEL IN DIAMOND FOR GROOVINGS ON SANDY WOOD AND HARD WOOD

View
Article 8F.12

SET OF PROFILED DIAMOND CUTTERS WITH CENTRAL INSERT CUTTERHEADS ON REQUEST, TO BE USED FOR PROFILING AND END TRIMMING OF VENEER CABINET DOORS, WORKING ON MILLING MACHINES , DOUBLE- END -TENONERS AND SPINDLE MOULDERS. THIS SET IS SUITABLE FOR SOLID WOOD PROFILES WITH UPPER AND LOWER COATING

View
Article 8F.13

PROFILED DIAMOND SET WITH CENTRAL INSERT CUTTERHEADS ON REQUEST, FOR SQUARING OF CABINET DOORS ON DOUBLE-END-TENONER MACHINES THIS SET IS SUITABLE FOR SOLID WOOD PROFILES WITH UPPER AND LOWER COATING

View
Article 8F.14

PROFILED INSERT CUTTERHEAD WITH DIAMOND KNIVES FOR DIFFERENT WORKING ON REQUEST. TO BE USED ON VEENER PANELS, HARDWOOD AND SANDY WOOD. WORKING ON MILLING MACHINES, DOUBLE-END-TENONERS AND SPINDLE MOULDERS.

View
Article 8F.14/R

SPARE PART: DIAMOND PROFILED KNIVE

View
Article 8F.15/A

DIAMOND PROFILED KNIFE, THICKNESS 2mm. FOR CUTTERHEADS AND SHANK CUTTERS WITH SIMPLE SHAPE (TO USE INSTEAD OF HM KNIFE)

View
Article 8F.15/B

DIAMOND PROFILED KNIFE, THICKNESS 2mm. FOR CUTTERHEADS AND SHANK CUTTERS WITH COMPLEX SHAPE (TO USE INSTEAD OF HM KNIFE)

View
Article 8F.16

PANEL RAISING CUTTER IN DIAMOND FOR DOORS PROFILES TO BE USED ON MILLING MACHINES AND DOUBLE END-TENONER MACHINES

View
Article 8F.21

DIAMOND CUTTER WITH STRAIGHT CUT FOR SIMPLE WORKING ON REQUEST. TO BE USED ON MILLING MACHINES, SPINDLE MOULDERS AND DOUBLE-END- TENONER MACHINES

View
Article 8F.22

DIAMOND CUTTER WITH STRAIGHT CUT FOR COMPLEX WORKING ON REQUEST TO BE USED ON MILLING MACHINES, SPINDLE MOULDERS AND DOUBLE-END- TENONER MACHINES

View
Article 8F.31

DIAMOND GROOVING CUTTER WORKING ON CHIPBOARD AND MDF COATED PANELS TO BE USED ON MILLING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.32

DIAMOND GROOVING CUTTER WITH SPURS FOR BETTER FINISHING ON CHIPBOARD AND MDF COATED PANELS TO BE USED ON MILLING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.33

ADJUSTABLE GROOVING CUTTER IN DIAMOND FOR CHIPBOARD AND MDF COATED PANELS. TO BE USED ON MILLING MACHINES AND DOUBLE-END-TENONER MACHINES

View
Article 8F.34

ADJUSTABLE GROOVING CUTTER IN DIAMOND WITH SPURS FOR BETTER FINISHING ON CHIPBOARD AND MDF COATED PANELS. TO BE USED ON MILLING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.35

DIAMOND CUTTER FOR GROOVING AND CHAMFERING WORKING ON MELAMIN PANELS TO BE USED ON MILLING MACHINES, EDGEBANDING AND DOUBLE-END- TENONERS

View
Article 8F.36

ADJUSTABLE GROOVING CUTTER IN DIAMOND WITH FIXED CHAMFERS WORKING ON THE EDGES AND ON THE BACK OF THE PANELS ADJUSTMENT OF THE CUTTING HEIGHT BY SPACER RINGS TO BE USED ON MILLING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.37

ADJUSTABLE GROOVING CUTTER IN DIAMOND WITH ADJUSTABLE CHAMFERS WORKING ON THE EDGES AND ON THE BACK OF THE PANELS TO BE USED ON MILLING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.41

HIGH SPEED MULTICUTTING CUTTER IN DIAMOND FOR SQUARING ON MDF, HARD WOOD AND SANDY WOOD TO BE USED ON MILLING MACHINES, SPINDLE MOULDERS AND ROUTING MACHINES

View
Article 8F.51

PROFILED CUTTER SET IN DIAMOND FOR PARQUET FLOORING MANUFACTURING WORKING ON DOUBLE-END-TENONER MACHINES

View
Article 8F.53

DIAMOND CUTTER USED FOR THE CLEANING OF THE LAMINATE IN THE POST- PREFORMING PROCESS

View
Article 8F.54

PROFILED DIAMOND CUTTER USED FOR THE SHAPING OF THE LOWER EDGE OF THE PANEL IN THE POST AND PREFORMING PROCESS

View
Article 8F.55

DIAMOND CUTTER FOR THE TRIMMING OF THE OVERHANGING LAMINATE IN THE SOFT- POSTFORMING PROCESS. WORKING ON EDGEBANDING AND DOUBLE-END- TENONER MACHINES

View
Article 8F.56

PROFILED DIAMOND CUTTER IN THE SOFT- POSTFORMING PROCESS. USED FOR THE SHAPING OF THE EDGE OF THE PANEL. WORKING ON EDGEBANDING MACHINES AND DOUBLE-END-TENONERS

View
Article 8F.57

DIAMOND SCORING CUTTER IN THE POST AND PREFORMING PROCESS USED FOR THE EXECUTION OF THE INCISION WHICH WILL BE FILLED BY HOT GLUE

View
Article 8F.61

TRIMMING DIAMOND CUTTER WORKING ON THE EDGE OF THE PANEL TO BE USED ON EDGEBANDING MACHINES

View
Article 8F.62

DIAMOND RADIUS CUTTER WORKING ON THE EDGE OF THE PANEL TO BE USED ON EDGEBANDING MACHINES

View
Article 8F.63

DIAMOND MULTIPROFILED CUTTER FOR THE RADIUS FINISHING AND BEVELLING ON CHIPBOARD PANELS WITH EDGE IN PVC. WORKING ON EDGEBANDING MACHINES

View
Article 8F.71

DIAMOND RECTIFYING CUTTERHEAD FOR ANTI-CHIPPING ON EDGEBANDING MACHINE WORKING FOR THE RECTIFYING OF EDGES, PRIOR TO THE EDGEBANDING, IN ORDER TO ELIMINATE CHIPPINGS AND SCORING MARKS CAUSED BY THE SIZING. SUITABLE FOR MDF AND CHIPBOARD PANELS COATED WITH PAPER, VENEER, MELAMINE AND LAMINATE. ROTATION : LEFT-HAND, RIGHT-HAND OR SYMMETRICAL

View
Article 8F.71/A

DIAMOND RECTIFYING CUTTERHEAD, ECONOMICAL TYPE, FOR ANTI-CHIPPING ON EDGEBANDING MACHINE. WORKING FOR THE RECTIFYING OF EDGES , PRIOR TO THE EDGE BANDING, IN ORDER TO ELIMINATE CHIPPINGS AND SCORING MARKS CAUSED BY THE SIZING. SUITABLE FOR MDF AND CHIPBOARD PANELS COATED WITH PAPER, VENEER, MELAMINE AND LAMINATE. ROTATION : LEFT-HAND, RIGHT-HAND OR SYMMETRICAL

View
Article 8F.71/S

DIAMOND RECTIFYING CUTTERHEAD ON REQUEST.

View
Article 8F.72

ADJUSTABLE RECTIFYING CUTTERHEADS IN DIAMOND FOR ANTI-CHIPPING ON EDGEBANDING MACHINE ADJUSTMENT OF THE CUTTING HEIGHT BY SPACER RINGS SYMMETRICAL ROTATION SUITABLE FOR MDF, CHIPBOARD PANELS COATED WITH PAPER, VENEER, MELAMINE AND LAMINATE.

View
Article 8F.73

ADJUSTABLE RECTIFYING CUTTERHEADS IN DIAMOND FOR FINISHING ON DOUBLE-END-TENONER AND COMBI MACHINES. ADJUSTMENT OF THE CUTTING HEIGHT BY SPACER RINGS. SUITABLE FOR MDF AND CHIPBOARD COATED PANELS. SYMMETRICAL ROTATION

View
Article 8F.91

DIAMOND STRAIGHT KNIFE Z=1 SPARE PART FOR INSERT CUTTERHEADS

View
Article 8F.92

SCRAPER DIAMOND KNIFE 45° Z=1 FOR WORKING OF CHAMFERS OR RADIUS ON COATED WOOD PANELS SPARE PART KNIFE FOR DIAMOND TOOLS WITH MECHANICAL FIXING

View
Article 8F.93

DIAMOND PROFILED KNIFE ON REQUEST SPARE PART FOR INSERT CUTTERHEAD

View
Article 8L.01

DIAMOND SIZING SAW BLADE FOR SLIDING TABLE SAW

View
Article 8L.02

DIAMOND SAW BLADE WITH CONCAVE TEETH FOR VERY GOOD SIZING FINISHING ON LACQUERED AND VENEERED PANELS

View
Article 8L.04

DIAMOND SAW BLADE FOR FINISHING CUT SUITABLE ON PANEL SIZING MACHINES : GIBEN, BIESSE, SCM, GABBIANI, MAZZA AND STETON

View
Article 8L.06

DIAMOND CONICAL SCORING BLADE SUITABLE FOR SLIDING TABLE SAW : SCM, CASADEI, NARDELLO MACHINES

View
Article 8L.07

DIAMOND KONICAL SCORING BLADE FOR PANEL SAW TO BE USED ON SIZING MACHINES : GABBIANI, GIBEN, SCM, BIESSE, MAZZA AND STETON

View
Article 8L.08

DIAMOND SCORING BLADE FOR DOUBLE- END-TENONER MACHINE

View
Article 8L.09

DIAMOND SCORING BLADE FOR SLIDING TABLE PANEL SAW

View
Article 8L.10

ADJUSTABLE DIAMOND SCORING BLADE ADJUSTMENT BY SPACER RINGS SUITABLE FOR PANEL SAW AND SLIDING TABLE SAW : SCM, CASADEI, NARDELLO MACHINES

View
Article 8L.11

DIAMOND GROOVING SAW BLADE MAX. Ø 200 (DIA TIPS H=4mm)

View
Article 8L.12

DIAMOND SAW BLADE FOR HOGGERS SUITABLE FOR DOUBLE-END-TENONER MACHINES

View
Article 8L.21

DIAMOND SCORING BLADE IN THE POST- PREFORMING PROCESS SUITABLE FOR THE SCORING OF THE UPPER SURFACE OF THE PANEL

View
Article 8P.01

PROFILED DIAMOND ROUTER BIT FOR SIMPLE SHAPE ON REQUEST. TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON CNC MACHINE

View
Article 8P.02

PROFILED DIAMOND ROUTER BIT FOR COMPLEX SHAPE ON REQUEST. TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON CNC MACHINE

View
Article 8P.03

PROFILED DIAMOND ROUTER BIT Z=2 FOR QUARTER ROUND SHAPE TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON CNC MACHINES

View
Article 8P.04

PROFILED DIAMOND ROUTER BIT WITH MECHANICAL FIXING. Z=2 DIAMOND PROFILED KNIVES. PROFILE ON REQUEST. TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON CNC MACHINES

View
Article 8P.04/R

SPARE PART FOR ART. 8P.04: PROFILED DIAMOND KNIFE

View
Article 8P.04/R-S

SPARE PART FOR ART. 8P.04-S: PROFILED DIAMOND KNIFE ON REQUEST

View
Article 8P.04/S

PROFILED DIAMOND ROUTER BIT WITH MECHANICAL FIXING. Z=2 DIAMOND PROFILED KNIVES. PROFILE ON REQUEST. TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON CNC MACHINES

View
Article 8P.05

PROFILED DIAMOND ROUTER BIT Z=2 FOR HALF-ROUND SHAPE TO BE USED ON COMPOSITE MAETRIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON CNC MACHINES

View
Article 8P.06

PROFILED DIAMOND ROUTER BIT WITH CHIPBREAKERS Z=2+1 TO REALISE HALF-ROUND PROFILES FOR BORING AND ROUTING ON CHIPBOARD AND MDF WORKING ON CNC MACHINES

View
Article 8P.07

PROFILED DIAMOND ROUTER BIT Z=1 FOR ENGRAVING 30°-45°-60° TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD WORKING ON CNC MACHINES

View
Article 8P.07/S

PROFILED DIAMOND ROUTER BIT Z=1 FOR ENGRAVING ON REQUEST

View
Article 8P.08

PROFILED DIAMOND ROUTER BIT FOR CHAMFERING 45° Z=2. TO BE USED ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. WORKING ON CNC MACHINES

View
Article 8P.08/S

CHAMFERING DIAMOND ROUTER BIT Z=2 ON REQUEST

View
Article 8P.09

PROFILED DIAMOND ROUTER BIT Z=2 FOR CHAMFERING ON THE LOWER PART OF THE COATED PANEL WORKING ON CNC MACHINES

View
Article 8P.10

PROFILED DIAMOND ROUTER BIT Z=2+1 FOR T-SLOT GROOVING ON MDF AND CHIPBOARD COATED MELAMINE. WORKING ON CNC MACHINES

View
Article 8P.10/S

T-SLOT GROOVING ROUTER BIT IN DIAMOND Z=2+1 PROFILE ON REQUEST

View
Article 8P.100

DIAMOND ROUTER BORING BIT ( tips mm.3,9×4) FOR HIGH SPEED AND BIG REMOVAL OF THE WORKING MATERIAL. MATERIAL TO USE : NOT COATED WORKING ON : CNC MACHINES. SHANK Ø 20X50

View
Article 8P.101

DIAMOND ROUTER BORING BIT WITH CHIPBREAKERS Z=2 BODY IN FULL HM. FOR HIGH SPEED AND BIG REMOVAL OF THE WORKING MATERIAL. MATERIAL TO USE : NOT COATED WORKING ON : CNC MACHINES

View
Article 8P.11

PROFILED DIAMOND ROUTER BIT Z=2 SPECIAL PROFILE AS DRAWING BELOW. WORKING ON CHIPBOARD AND MDF TO BE USED ON CNC MACHINES

View
Article 8P.111

DIAMOND GROOVING ROUTER BIT SHANK Ø 20. Z=1 DOWN CUT. WORKING ON COMPOSITE MATERIAL, MDF AND CHIPBOARD COATED ON THE UPPER SIDE OF THE PANEL. TO USE ON CNC MACHINES

View
Article 8P.112

DIAMOND GROOVING ROUTER BIT BODY IN FULL HARD METAL Z=1 DOWN CUT. WORKING ON COMPOSITE MATERIAL, MDF AND CHIPBOARD COATED ON THE UPPER SIDE OF THE PANEL. TO USE ON CNC MACHINES

View
Article 8P.112/S

DIAMOND GROOVING ROUTER BIT ON REQUEST. BODY IN FULL HARD METAL. Z=1 DOWN CUT. WORKING ON COMPOSITE MATERIAL, MDF AND CHIPBOARD WITH COATING ON THE UPPER SIDE OF THE PANEL. TO USE ON CNC MCHINES

View
Article 8P.12

PROFILED DIAMOND ROUTER BIT FOR THE EXECUTION OF RADIUS ON THE UPPER AND LOWER SIDE OF THE PANEL. TO BE USED ON MDF, CHIPBOARD COATED MELAMINE, HARD WOOD AND SANDY WOOD. WORKING ON CNC MACHINES

View
Article 8P.12/S

PROFILED DIAMOND ROUTER BIT FOR RADIUS ON REQUEST WORKING ON UPPER /LOWER SIDE OF THE PANEL

View
Article 8P.121

DIAMOND GROOVING ROUTER BIT Z=2 DOWN CUT + 1 HM. SHANK Ø 20. GOOD FINISHING ON COMPOSITE MATERIALS, MDF AND CHIPBOARD COATED ON THE UPPER SIDE OF THE PANEL. WORKING ON CNC MACHINES

View
Article 8P.122

DIAMOND GROOVING ROUTER BIT Z=2 DOWN CUT. BODY IN FULL HM. GOOD FINISHING ON COMPOSITE MATERIALS, MDF AND CHIPBOARD COATED ON THE UPPER SIDE OF THE PANEL. WORKING ON CNC MACHINES

View
Article 8P.122/S

DIAMOND GROOVING ROUTER BIT ON REQUEST. BODY IN FULL HARD METAL. Z=2 DOWN-CUT. WORKING ON COMPOSITE MATERIALS, MDF AND CHIPBOARD WITH COATING ON THE UPPER SIDE OF THE PANEL. TO USE ON CNC MACHINES

View
Article 8P.13

PROFILED DIAMOND ROUTER BIT FOR CHAMFERING WORKING ON THE UPPER AND LOWER SIDE OF THE PANEL. TO BE USED ON MDF, CHIPBOARD COATED MELAMINE, HARD WOOD AND SANDY WOOD. WORKING ON CNC MACHINES

View
Article 8P.13/S

PROFILED DIAMOND ROUTER BIT FOR CHAMFERING UP AND DOWN CHAMFERS ON REQUEST

View
Article 8P.131

DIAMOND ROUTING AND BORING BIT Z=1 SHANK Ø 20X50. WORKING ON ROUGH MATERIAL WITHOUT ANY COATING TO USE ON CNC MACHINES

View
Article 8P.132

DIAMOND ROUTING AND BORING BIT Z=1 BODY IN FULL HM WORKING ON ROUGH MATERIAL WITHOUT ANY COATING TO USE ON CNC MACHINES

View
Article 8P.133

DIAMOND ROUTING AND BORING BIT. BODY IN FULL HM. Z=1 WITH SMALL CHAMFER TO AVOID CHIPPINGS. WORKING ON ROUGH MATERIAL WITHOUT ANY COATING

View
Article 8P.134

DIAMOND ROUTING AND BORING BIT Z=1 BODY IN FULL HM WITH SMALL DIAMETER UNTIL MAXIMUM Ø 12. WORKING ON ROUGH MATERIAL WITHOUT ANY COATING. TO USE ON CNC MACHINES

View
Article 8P.14

DIAMOND ROUTER BIT FOR PANEL RAISING ON REQUEST, TO BE USED ON MDF, CHIPBOARD, OAK, CHESTNUT. WORKING ON CNC MACHINES

View
Article 8P.141

DIAMOND ROUTING AND BORING BIT Z=2+1 HM ON SHANK Ø 20 WORKING ON ROUGH MATERIAL WITHOUT ANY COATING TO USE ON CNC MACHINES

View
Article 8P.142

DIAMOND BORING AND ROUTING BIT Z=2 BODY IN FULL HARD METAL GOOD FINISHING ON ROUGH MATERIAL WITHOUT ANY COATING TO USE ON CNC MACHINES

View
Article 8P.142/S

DIAMOND ROUTER BIT Z=2 FOR ROUTING AND BORING ON REQUEST BODY IN FULL HARD METAL GOOD FINISHING ON ROUGH MATERIAL WITHOUT ANY COATING TO USE ON CNC MACHINES

View
Article 8P.15

CNC PRFOFILED DIAMOND ROUTER BITS FOR CABINET DOORS Z=2 ON SHANK Ø 20. WORKING ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. TO USE ON CNC MACHINES

View
Article 8P.15/S

PROFILED DIAMOND ROUTER BITS FOR CABINET DOORS PROFILES ON REQUEST

View
Article 8P.161

DIAMOND ROUTING AND BORING BIT WITH HM CENTRAL KNIFE WORKING ON HARD WOOD COATED ON THE UPPER AND LOWER SIDE OF THE PANEL TO USE ON CNC MACHINES

View
Article 8P.166

DIAMOND ROUTER BIT WITH CHIPBREAKERS ON BODY IN FULL HM, Z=3 ON SHANK Ø 12, FOR SHUTTERS SLOT WORKING, ON SANDY WOOD AND “OKUME”

View
Article 8P.171

DIAMOND ROUTER BIT Z=2 WITH CHIPBREAKERS FOR DOORS LOCKS ON SHANK Ø 16. SPECIAL BODY MATERIAL TO AVOID VIBRATIONS.

View
Article 8P.181

DIAMOND BORING BIT FOR HINGES Z=2+2 ON SHANK Ø 10 WITH ADJUSTABLE CENTRAL BORING TIP. TO USE FOR THE EXECUTION OF HINGE HOUSINGS ON COATED PANELS AND COMPOSITE MATERIALS. WORKING ON CNC AND BORING MACHINES

View
Article 8P.182

DIAMOND BORING BIT FOR HINGES Z=2+4 ON SHANK Ø 10 WITH ADJUSTABLE CENTRAL BORING TIP. TO USE FOR THE EXECUTION OF HINGE HOUSINGS WITH VERY GOOD FINISHING ON COATED PANELS WITHOUT CHIPPINGS. TO USE ON WORKING CENTERS AND BORING MACHINES

View
Article 8P.183

DIAMOND BORING BIT FOR HINGES Z=2+2 ON SHANK Ø 10 WITH ADJUSTABLE CENTRAL BORING TIP AND RADIATE SHAVINGS, FOR THE EXECUTION OF HINGE HOUSINGS ON COATED PANELS. TO USE ON WORKING CENTERS AND BORING MACHINES

View
Article 8P.184

DIAMOND BORING BIT FOR HINGES WITH MECHANICAL FITTING Z=2+2 WITH ADJUSTABLE CENTRAL BORING TIP AND RADIATE SHAVINGS FOR THE EXECUTION OF HINGE HOUSINGS ON COATED PANELS WORKING ON CNC AND BORING MACHINES SHANK Ø 10

View
Article 8P.191

DIAMOND BORING BIT FOR BLIND HOLES Z=2, WITHOUT CHIPPINGS ON COATED PANELS. TO USE ON BORING MACHINES, SHANK Ø 10

View
Article 8P.192

DIAMOND BORING BIT FOR THROUGH HOLES. SHANK Ø 10 Z=1 OR Z=2. DRILLING WITHOUT CHIPPINGS ON COATED PANELS TO USE ON BORING MACHINES

View
Article 8P.192/A

DIAMOND HELICOIDAL BORING BIT Z=1 DRILLING OF THROUGH HOLES WITHOUT CHIPPINGS ON COATED PANELS SHANK Ø 10

View
Article 8P.193

FLARING HEAD IN DIAMOND Z=2. TO BE FITTED ON DRILLING BITS OF TROUGH AND BLIND HOLES (ART. 8P.191 – 8P.192) FOR THE DRILLING AND FLARING WITHOUT ANY CHIPPINGS IN ONLY ONE PASS. TO USE ON COATED PANELS. WORKING ON BORING MACHINES

View
Article 8P.194

FLARING HEAD IN DIAMOND Z=2, SHANK Ø 20 TO BE FITTED ON HELICOIDAL DRILLING BIT IN HM. FOR DRLLING AND FLARING ON COATED PANELS. TO USE ON CNC MACHINES

View
Article 8P.21

MULTICUTTING ROUTER BORING BIT ECONOMIC DIAMOND Z=1. SHANK Ø 20 X 50. HIGH FEED SPEED (15 MT) WITH GOOD FINISHING. WORKING ON CNC MACHINES

View
Article 8p.22

CNC DIAMOND ROUTING & BORING BIT ECONOMIC VERSION Z=1 ( TIPS 11X2,5) SHANK Ø 20X50. WORKING ON MDF AND CHIPBOARD COATED MELAMINE. TO USE ON CNC MACHINES

View
Article 8p.22/S

ROUTING AND BORING BIT ON REQUEST ECONOMIC DIAMOND

View
Article 8P.23

CNC DIAMOND ROUTER BORING BIT Z=1 RESHARPENABLE DIAMOND (TEETH 11 X 4) SHANK Ø 20 X 50. WORKING ON MDF, CHIPBOARD COATED MELAMINE

View
Article 8P.23/ER-32

CNC DIAMOND ROUTING AND BORING BIT ON SHANK ER32, PATENT PENDING. Z=1 DIAMOND RESHARPENABLE ( TIPS 11 x 4 mm). WORKING ON MDF AND CHIPBOARD COATED MELAMINE.

View
Article 8P.23/ER-40

CNC DIAMOND ROUTING AND BORING BIT ON SHANK ER40, PATENT PENDING. Z=1 DIAMOND RESHARPENABLE ( TIPS 11 x 4 mm). WORKING ON MDF AND CHIPBOARD COATED MELAMINE.

View
Article 8P.23/S

ROUTING AND BORING BIT ON REQUEST RESHARPENABLE DIAMOND

View
Article 8P.24

DIAMOND HELICOIDAL ROUTER BIT Z=2 (TIPS 11X4) FOR ROUTING AND BORING ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE. WORKING ON CNC MACHINES SHANK Ø 20X50

View
Article 8P.25

MULTICUTTING HELICOIDAL ROUTER BIT Z=3+3 ( TIPS 6 X 4 ) FOR BORING, SHAPING AND SQUARING ON CHIPBOARD COATED PANELS AND MDF. HIGH WORKING SPEED AND GOOD FINISHING ON WORKING CENTERS MACHINES. AVAILABLE ON SHANK Ø 20 X 50 OR Ø 25 X 50

View
Article 8P.25/ER-32

CNC DIAMOND SPIRAL ROUTER BIT Z=3+3 ( TIPS 11 X 4) ON SHANK ER32, PATENT PENDING, FOR HIGH SPEED AND GOOD FINISHING ON MDF AND CHIPBOARD COATED MELAMINE.

View
Article 8P.25/ER-40

CNC DIAMOND SPIRAL ROUTER BIT Z=3+3 ( TIPS 11 X 4) ON SHANK ER40, PATENT PENDING, FOR HIGH SPEED AND GOOD FINISHING ON MDF AND CHIPBOARD COATED MELAMINE.

View
Article 8P.25/S

DIAMOND MULTICUTTING HELICOIDAL ROUTER BIT FOR HIGH SPEED Z=3+3 ON REQUEST

View
Article 8P.26

DIAMOND MULTICUTTING HELICOIDAL ROUTER BIT FOR HIGH SPEED (30 MT) AND LONG CUTTING LIFE FOR BORING, SHAPING AND SQUARING WITH VERY GOOD FINISHING ON COMPOSITE MATERIALS AND CHIPBOARD COATED PANELS WORKING ON CNC SHANK Ø 20 X 50 AND Ø 25 X 50 Z=2+2 ( TIPS 7 X 4 AND 10 X 4)

View
Article 8P.26/ER-32

CNC MULTICUTTING SPIRAL ROUTER BIT Z=2+2 (TIPS 11X4) ON SHANK ER32, PATENT PENDING, FOR HIGH SPEED AND VERY GOOD FINISHING ON CHIPBOARD COATED MELAMINE, MDF AND COMPOSITE MATERIALS.

View
Article 8P.26/ER-40

CNC MULTICUTTING SPIRAL ROUTER BIT Z=2+2 (TIPS 11X4) ON SHANK ER40, PATENT PENDING, FOR HIGH SPEED AND VERY GOOD FINISHING ON CHIPBOARD COATED MELAMINE, MDF AND COMPOSITE MATERIALS.

View
Article 8P.26/S

DIAMOND MULTICUTTING HELICOIDAL ROUTER BIT FOR HIGH SPEED Z=2+2 ON REQUEST

View
Article 8P.27

DIAMOND MULTICUTTING HELICOIDAL ROUTER BIT Z=3+3 (TIPS mm.11×4) FOR HIGH SPEED (30 METERS) AND LONG CUTTING LIFE FOR BORING AND ROUTING WITH VERY GOOD FINISHING ON COMPOSITE MATERIALS, CHIPBOARD COATED MELAMINE ON BOTH SIDES WORKING ON CNC MACHINES SHANK Ø 20X50 OR Ø 25X50

View
Article 8P.28

DIAMOND MULTICUTTING HELICOIDAL ROUTER BIT Z=4+4 (TIPS mm.6,5×4 and mm.11×4) FOR BORING AND ROUTING WITH VERY GOOD FINISHING ON COMPOSITE MATERIALS, CHIPBOARD COATED MELAMINE ON BOTH SIDES. WORKING ON CNC MACHINES HIGH FEEDING SPEED (30 MT.) SHANK Ø 20X50 OR Ø 25X50

View
Article 8P.29

MULTICUTTING ROUTER BIT ECONOMICAL DIAMOND Z=2+2 SHANK Ø 20X50. HIGH FEEDING SPEED 30 Mt. WITH GOOD FINISHING

View
Article 8P.31

DIAMOND ROUTING AND BORING BIT FOR GOOD FINISHING. FOR THE SHAPING OF CHIPBOARD PANELS COATED MELAMINE ON BOTH SIDES, MDF AND COMPOSITE MATERIALS. WORKING ON CNC MACHINES. Z=2+1 (TIPS 11X2,5)

View
Article 8P.32

DIAMOND ROUTING BIT Z=4+2. (TIPS mm.7×4 and mm.10×4) FOR THE SHAPING OF COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE ON BOTH SIDES, WITH VERY GOOD FINISHING. WORKING ON CNC MACHINES

View
Article 8P.34

DIAMOND ROUTER BORING BIT Z=1+1 BODY IN FULL HARD METAL WORKING FOR CABINET DOORS AND GLASS SLOT TO BE USED ON CNC MACHINES

View
Article 8P.34/S

DIAMOND ROUTING AND BORING BIT BODY IN FULL HARD METAL FOR SPECIAL WORKING ON REQUEST Z=1+1 OR Z=2+2

View
Article 8P.35

DIAMOND ROUTING BORING BIT. Z=1+1 (tips mm.12×3,1). BODY IN FULL HARMETAL. WORKING ON COMPOSITE MATERIALS, MDF AND COATED CHIPBOARD PANELS ON BOTH SIDES WITH MELAMINE AND OTHERS…TO BE USED ON CNC MACHINES

View
Article 8P.36

DIAMOND ROUTER BIT (TIPS mm.12×3,1) BODY IN FULL HARDMETAL FOR ROUTING AND BORING WITH SMALL DIAMETERS. WORKING ON COMPOSITE MATERIALS, MDF AND CHIPBOARD PANELS COATED ON BOTH SIDES WITH MELAMINE , VEENER OR PLASTIC MATERIAL. TO BE USED ON CNC MACHINES

View
Article 8P.38

DIAMOND NESTING ROUTER BIT Z=2 FOR HIGH SPEED AND GOOD FINISHING FEED SPEED 15 Mt. Min. SHANK Ø 20X50

View
Article 8P.41

DIAMOND MULTICUTTING ROUTER BIT WITH DOUBLE ROTATION LEFT & RIGHT HAND. FOR BORING AND ROUTING WITHOUT TOOL-CHANGE. GOOD FINISHING ON COMPOSITE MATERIALS, CHIPBOARD AND MDF. WORKING ON CNC : HOMAG, IMA, BIESSE, MORBIDELLI … SHANK Ø 25X60 Z=2 OR Z=3

View
Article 8P.42

DIAMOND MULTICUTTING ROUTER BIT WITH DOUBLE ROTATION LEFT & RIGHT HAND. FOR BORING AND ROUTING WITHOUT TOOL- CHANGE. GOOD FINISHING ON COMPOSITE MATERIALS, CHIPBOARD AND MDF. WORKING ON CNC : HOMAG, IMA, BIESSE, MORBIDELLI … SHANK Ø 25X60 Z=4 + 2

View
Article 8P.51

DIAMOND ROUTER BIT ON REQUEST FOR SIMPLE WORKING WITH STRAIGHT CUT. WORKING ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. TO BE USED ON CNC WORKING CENTERS MACHINES

View
Article 8P.52

DIAMOND ROUTER BIT ON REQUEST FOR COMPLEX WORKING WITH STRAIGHT CUT. WORKING ON COMPOSITE MATERIALS, MDF, CHIPBOARD COATED MELAMINE, HARDWOOD AND SANDY WOOD. TO BE USED ON CNC WORKING CENTERS MACHINES

View
Article 8P.55

DIAMOND ROUTING BIT WITH DOUBLE DIAMETER FOR BORING AND SHAPING KITCHEN TOP ON CNC MACHINES

View
Article 8P.57

SURFACING DIAMOND ROUTER BIT WORKING ON MDF AND COMPOSITE MATERIALS TO USE ON CNC MACHINES

View
Article 8P.57/S

SURFACING DIAMOND ROUTER BIT ON REQUEST

View
Article 8P.58

INSERT ROUTER BIT WITH NATURAL DIAMOND FOR THE POLISHING OF COLOURLESS PLASTIC MATERIAL TO USE ON CNC MACHINE

View
Article 8P.61

HIGH SPEED MULTICUTTING ROUTER BIT FOR FACING OF COATED PANELS VERY GOOD FINISHING. MACHINE : CNC. FEED SPEED 30-40 Mt. Min. SHANK Ø 25X50

View
Article 8P.65

MULTICUTTING DIAMOND ROUTER BIT FOR SPECIAL WORKING ON HONEYCOMB PANEL SHANK Ø 20X50 Z=2

View
Article 8P.71

GROOVING DIAMOND ROUTER BIT WORKING ON THE EDGE OF THE PANEL TO USE ON COMPOSITE MATERIAL AND COATED PANELS, MDF AND CHIPBOARD FOR CNC MACHINES

View
Article 8P.71/S

GROOVING DIAMOND ROUTER BIT ON REQUEST

View
Article 8P.72

DIAMOND ROUTER BIT FOR SQUARING AND GROOVING IN ONLY ONE PASS. WORKING ON THE EDGE OF THE PANEL. TO USE ON COMPOSITE MATERIALS, CHIPBOARD AND MDF COATED PANELS, FOR CNC MACHINES

View
Article 8P.73

DIAMOND ROUTER BIT FOR SQUARING AND GROOVING IN ONLY ONE PASS. WORKING ON THE EDGE OF THE PANEL. VERY GOOD FINISHING. TO USE ON COMPOSITE MATERIALS, CHIPBOARD AND MDF COATED PANELS, FOR CNC MACHINES

View
Article 8P.74

SPARE PART : FOR ART.8P.72 AND 8P.73 SAW IN HM OR DIAMOND

View
Article 8T.01

HOGGER WITH HM KNIVES AND DIAMOND SAW BLADE USED ON DOUBLE END TENONERS MACHINES

View
Article 8T.02

DIAMOND HOGGER TO BE USED WITH THE SCORING ON DOUBLE END TENONERS MACHINES (DIA H=6)

View
Article 8T.04

DIAMOND HOGGER FOR DOUBLE END TENONERS MACHINES (DIA H=5)

View
Article 8T.06

PROFILED DIAMOND HOGGER FOR HIGH SPEED (20/80 mt/min.) ON DOUBLE END TENONERS MACHINES (DIA H=6)

View
Article 8T.08

DIAMOND HOGGER WITH HM HELICOIDAL SEGMENTS (DIA H=6) USED ON DOUBLE END TENONERS MACHINES THE HELICOIDAL ARRANGEMENT OF THE HM SEGMENTS ALLOWS AN EASIER WOODCHIPS EVACUATION.

View
Article 8T.09

DIAMOND HOGGER ASSEMBLED IN TWO PIECES FOR HIGH SPEED ( DIA H=6) LONGER CUTTING LIFE AND OPTIMAL FINISHING QUALITY TO USE ON DOUBLE END TENONERS MACHINES

View
Article 8T.16

SLEEVE FOR DOUBLE END TENONERS MACHINES

View